MeCan Medical High Quality Portable UVB Lamp Vitiligo Psoriasis Eczema UV Phototherapy Wholesale - Guangzhou MeCan Medical Limited,MeCan provide one-stop solutions for new hospitals, clinics, labs and universities, has helped 270 hospitals, 540 clinics,190 vet clinics to set up in Malaysia, Africa, Europe, etc. we can save your time, energy and money. MCT0002 Ultraviolet Phototherapy Instrument is a portable Ultraviolet Phototherapy Instrument for localized irradiation, which is used for adjuvant treatment of psoriasis and vitiligo skin diseases. Anyone who contacts this Ultraviolet Phototherapy Instrument must implement all Important Tips and safety provisions. If you are interested in the UV Phototherapy, please contact us anytime.
Quantity: | |
---|---|
Portable UVB Lamp Vitiligo Psoriasis Eczema UV Phototherapy
Model:MCT0002
MCT0002 Ultraviolet Phototherapy Instrument is a portable Ultraviolet Phototherapy Instrument for localized irradiation, which is used for adjuvant treatment of psoriasis and vitiligo skin diseases. Anyone who contacts this Ultraviolet Phototherapy Instrument must implement all Important Tips and safety provisions .
Working Principle
Set the irradiation dose on the controller, then press "power key" to confirm; place the phototherapy instrument close to the affected area, and press "power key" to lighten the instrument. The dose value starts to count negatively. When the dose returns to zero, the light is turned off, the treatment ends.
Dose set method
1.Turn on
(1)Long press Power Key , then the instrument is turned on. The display screen flash trade mark.
(2)After self-examination, the display screen will show the irradiation dose of the previous treatment. For the first use, the display screen will show “0.00J/cm²”
2. Set irradiation dose
Set the therapeutic dose according to the treatment requirements. There are three digits on the display screen, which can be set separately. The following takes the setting of the radiation dose of "1.35J/cm2" as an example to introduce the setting method (this dose is not the recommended radiation dose).
Directions for Use
1.Preparation before irradiation
- Identify the treatment area and thoroughly clean the skin surface without oil or makeup.
- Please wear professional UV goggles during use.
- Determine the therapeutic dose.
2.Set irradiation dose
See “Dose set method”.
3.Start treatment
Place the radiation window gently against the skin surface. Press Power Key to start the treatment.
Take the radiation dose 0.10J/cm2 as an example.
Specification:
Technical Parameters | |
Voltage | AC 100-240V |
Power frequency | 50-60Hz |
Power current | ≤0.5A |
Dimensions | 147×23×26mm |
Weight | ≤0.5Kg |
Peak wavelength | 308nm |
Radiation dose range | 0.01~5J/cm2 |
Treatment area | 1.5×1.5cm |
Working and Storage Environment | |
Working conditions | temperature:10℃~30℃ |
relative humidity:30%~75% | |
atmospheric pressure:700hPa ~ 1060hPa | |
Storage conditions | temperature: -40℃~+55℃ |
relative humidity: ≤95% no condensed water, no corrosive gas, and good ventilation |
More pictures of the MCT0002 Portable UVB Lamp:
Portable UVB Lamp Vitiligo Psoriasis Eczema UV Phototherapy
Model:MCT0002
MCT0002 Ultraviolet Phototherapy Instrument is a portable Ultraviolet Phototherapy Instrument for localized irradiation, which is used for adjuvant treatment of psoriasis and vitiligo skin diseases. Anyone who contacts this Ultraviolet Phototherapy Instrument must implement all Important Tips and safety provisions .
Working Principle
Set the irradiation dose on the controller, then press "power key" to confirm; place the phototherapy instrument close to the affected area, and press "power key" to lighten the instrument. The dose value starts to count negatively. When the dose returns to zero, the light is turned off, the treatment ends.
Dose set method
1.Turn on
(1)Long press Power Key , then the instrument is turned on. The display screen flash trade mark.
(2)After self-examination, the display screen will show the irradiation dose of the previous treatment. For the first use, the display screen will show “0.00J/cm²”
2. Set irradiation dose
Set the therapeutic dose according to the treatment requirements. There are three digits on the display screen, which can be set separately. The following takes the setting of the radiation dose of "1.35J/cm2" as an example to introduce the setting method (this dose is not the recommended radiation dose).
Directions for Use
1.Preparation before irradiation
- Identify the treatment area and thoroughly clean the skin surface without oil or makeup.
- Please wear professional UV goggles during use.
- Determine the therapeutic dose.
2.Set irradiation dose
See “Dose set method”.
3.Start treatment
Place the radiation window gently against the skin surface. Press Power Key to start the treatment.
Take the radiation dose 0.10J/cm2 as an example.
Specification:
Technical Parameters | |
Voltage | AC 100-240V |
Power frequency | 50-60Hz |
Power current | ≤0.5A |
Dimensions | 147×23×26mm |
Weight | ≤0.5Kg |
Peak wavelength | 308nm |
Radiation dose range | 0.01~5J/cm2 |
Treatment area | 1.5×1.5cm |
Working and Storage Environment | |
Working conditions | temperature:10℃~30℃ |
relative humidity:30%~75% | |
atmospheric pressure:700hPa ~ 1060hPa | |
Storage conditions | temperature: -40℃~+55℃ |
relative humidity: ≤95% no condensed water, no corrosive gas, and good ventilation |
More pictures of the MCT0002 Portable UVB Lamp: